Search for "hard drive stats" returned 35 results
Search Tip: Boolean operators + (AND) - (NOT) and "search phrase in quotes" supported.
trends, we also look at the lifetime annualized failure rates of our hard drives. The chart below is the annualized failure rates of all of the drives currently in production. Hard Drive Stats Webinar We’ll be presenting the webinar “Backblaze Hard Drive Stats for 2018” on Thursday, January 24, 2019 at 10:00 Pacific time. The webinar will dig deeper into…
[47 search hits: 33 in post body, 2 in title, 8 in comments.]
…besting the previous low of 1.82% from Q2 of 2018. The Hard Drive Stats Data The complete data set used to create the information used in this review is available on our Hard Drive Test Data page. You can download and use this data for free for your own purpose. All we ask are three things: 1) you cite Backblaze…
[23 search hits: 13 in post body, 2 in title, 5 in comments.]
…2016 the number of 8 TB drives rose to 8,765 with 48 failures and an annualized failure rate of 1.6%. The “1.0TB” drives were 5+ years old on average when they were retired. There are only 45 of the “5.0TB” drives in operation. Can’t Get Enough Hard Drive Stats? We’ll be presenting the webinar “Backblaze Hard Drive Stats for 2016”…
[58 search hits: 39 in post body, 2 in title, 11 in comments.]
…based on data from April 2013 through September 2016 for all data drive models with active drives as of September 30, 2016. Hard drive stats webinar: Join Us! Want more details on our Q3 drive stats? View the webinar below in the Backblaze BrightTALK channel. You will need to subscribe to the Backblaze channel to view the webinar, but you’ll…
[61 search hits: 34 in post body, 2 in title, 19 in comments.]
…drives that have the lowest lifecycle cost. Q: Do your hard drive stats really matter for a consumer trying to make a purchase? A: That depends. If you view our data center as a “worst-case” scenario for hard drives, then yes, you can surmise that any hard drive that a consumer would buy, would perform at a slightly better rate…
[45 search hits: 39 in post body, 2 in title, 4 in comments.]
…— The average number of hard drives that have failed each day from April 2013 until the end of December 2017. Can’t Get Enough Hard Drive Stats? We’ll be presenting the webinar “Backblaze Hard Drive Stats for 2017” on Thursday February 9, 2018 at 10:00 Pacific time. The webinar will dig deeper into the quarterly, yearly, and lifetime hard drive…
[56 search hits: 32 in post body, 2 in title, 18 in comments.]
…use RAID-6, our Backblaze Vaults use our own open-sourced implementation of Reed-Solomon erasure coding instead. Both techniques have a concept of a drive not syncing or staying synced with the other member drives in its group A different look at Hard Drive Stats We publish the hard drive stats data on our website with the Q1 2016 results there as…
[64 search hits: 28 in post body, 2 in title, 27 in comments.]
…20-pod Backblaze Vault would have 14.4 petabytes of raw storage. Better Late Than Never Sorry for being a bit late with the hard drive stats report this quarter. We were ready to go last week, then this happened. Some folks here thought that was more important than our Q2 Hard Drive Stats. Go figure. Drive Stats at the Storage Developers…
[41 search hits: 24 in post body, 2 in title, 12 in comments.]
